Call Us 24/7 +91 9624471888
Mail For Support info@applewires.com

Looking for a dependable cable manufacturer? Apple Insulated Wires Pvt. Ltd. makes electrical cables in Dadra, in the Union Territory of Dadra and Nagar Haveli, and supplies them to homes, farms, pump makers and industry across India and abroad. As an electrical cable manufacturer and supplier, we focus on copper electrical cables that are safe, flexible and tested in our own lab before dispatch.

Our cable range includes submersible flat cables for pumps and flexible wires for everyday wiring. See the products below. Then read on to learn how cables differ from wires, how to choose the right cable for your job, and how to look after it.

 

What Is the Difference Between a Wire and a Cable?

People often use the words wire and cable as if they mean the same thing, but they are not the same. A wire is a single strand of metal, or a few strands twisted together, usually covered with insulation. A cable is a group of insulated wires, called cores, packed together inside a common outer cover.

That outer cover is the key difference. It holds the cores together and protects them from water, rubbing, heat and chemicals. A cable is therefore tougher and better suited to places where the wiring faces hard conditions, such as inside a borewell, on a farm or on a factory floor.

 

Our Range of Cables

We make two types of cable and wire for different jobs.

Submersible flat cables carry power from the surface to a submersible pump deep in a well or borewell. The cores sit side by side in a flat shape, which helps the cable fit down a narrow borewell. The cable has to work under water for long periods, so it needs strong, water-resistant insulation and a tough outer cover.

Flexible wires are made for everyday wiring in homes, shops and workplaces. They bend easily, which makes them simple to pull through pipes and to connect to switches, sockets and appliances.

If you are not sure which one suits your job, tell us how and where you will use it. We can adjust specifications to match your project. If your work involves winding the motor itself, see our submersible copper winding wires. Winding wire and cable work together in a submersible pump system, so many customers buy both from us.

 

Why Copper Electrical Cables?

Copper is the standard choice for electrical cables, and for good reasons.

It carries current well. Copper has very low resistance, so less energy is lost as heat.

It is flexible. Copper conductors bend without breaking, especially when they are made of many fine strands.

It lasts. Copper holds up well to connection and handling, so cables stay reliable for years.

It is safe to connect. Copper makes steady, secure joints at terminals when connected properly.

For these reasons, copper electrical cables are used in homes, farms and industry alike. Good insulation and a tough outer cover on top of a copper conductor give you a cable you can depend on.

 

Where Our Cables Are Used

Our cables and flexible wires serve many places. Common uses include:

  • Submersible pumps for borewells and open wells

  • Agricultural pumps and irrigation systems

  • Domestic water supply and household wiring

  • Shops, offices and small workplaces

  • Industrial electrical cables for machines and plants

  • Appliance and equipment connections

  • Light industrial and workshop wiring

 

Key Benefits of Our Cables

Safe insulation. Strong insulation keeps current where it should be and lowers the chance of shocks and short circuits.

Flexible to install. Cables and wires that bend easily save time and effort during installation.

Tough outer cover. The cover resists rubbing, moisture and many chemicals, so the cable lasts in hard conditions.

Copper conductors. Copper gives steady current flow and long service life.

Tested quality. Every product is checked in our own lab before it ships.

Good value. We supply large and small orders at fair prices.

 

How to Choose the Right Cable

A few simple checks will help you pick well:

  1. Check the job. A pump cable, a house wire and a factory cable do not need the same product.

  2. Check the load. The conductor must be thick enough for the current the equipment draws. A cable that is too thin will run hot.

  3. Check the place. Wet, hot, dusty or rough places need tougher insulation and outer cover.

  4. Check the length. Long runs lose more power, so they may need a thicker conductor.

  5. Think about flexibility. If the cable has to bend or move, choose a flexible type.

  6. Ask us for help. Our team can advise on size and type for your project.

For a wider look at wiring products, visit our electric wires and cables page.

 

Safety and Installation Tips

A good cable still needs good handling. These habits protect both the cable and the people who use it:

  • Use a cable with the right size for the load, not the cheapest size.

  • Keep cables away from sharp edges and heavy crushing.

  • Avoid sharp bends and pulling the cable by force.

  • Make joints and connections properly, with the right connectors.

  • Protect the cable ends from water, especially on pumps.

  • Do not overload a cable, and replace any with damaged insulation.

  • Store spare cable in a dry, clean place away from direct heat and oil.

For electrical work, always have connections made by a qualified person. This protects both people and equipment.

 

Why Buy from Apple Insulated Wires?

With over 25 years in the wire and cable industry, Apple Insulated Wires Pvt. Ltd. knows that customers need cable that behaves the same way every time. As a flexible cable manufacturer, power cable and industrial cable supplier, we treat each order with the same care, whether it is small or large. We understand that when a cable fails, the cost of replacing it is much higher than the cost of buying a good one.

  • Tested in our own lab: every product is checked in-house before it ships.

  • Made to your needs: we can adjust conductor size and insulation to match your project.

  • Clean processes: our work is RoHS compliant and eco-friendly.

  • Good value for bulk orders: we supply large quantities at competitive prices.

  • Delivery in India and abroad: we pack with care and prepare export documents.

  • Wire and cable from one supplier: we make winding wires and cables for pump systems.

  • Helpful support: our team is ready to answer your questions.

 

Conclusion

The right cable keeps equipment running and people safe. With copper conductors, strong insulation and a tough outer cover, our submersible flat cables and flexible wires are made for real work in homes, farms and industry. Apple Insulated Wires Pvt. Ltd. is ready to help you choose, from your first small order to regular bulk supply. Call us on +91 9624471888 or write to info@applewires.com, and our team will guide you.

 

FAQ

Frequently Asked Questions

Find answers to some of the most common questions.

A wire is a single conductor, or a few twisted strands, with insulation. A cable is a group of insulated wires packed inside one outer cover.

They carry power from the surface to a submersible pump inside a well or borewell. Their flat shape helps them fit in narrow spaces.

They are used for everyday wiring in homes, shops and workplaces. They bend easily, so they are simple to install.

Copper carries current well, bends without breaking and makes steady joints. It is the standard conductor for electrical cables.

Copper carries current well, bends without breaking and makes steady joints. It is the standard conductor for electrical cables.

The size depends on the current the equipment draws and the length of the run. Share your load and your cable length with our team, and we will suggest the right size.

Yes. We can adjust details such as conductor size and insulation. Share your needs with our team and we will suggest the right option.

Yes. We handle bulk orders and ship across India and to other countries, with suitable packing and the documents needed for export.